Last seen: November 14, 2023 7:41 pm
@john-minchell be careful printing with ABS as it gives off toxic fumes! Read this/p>
@john-minchell it is advisable to use harder nozzles when printing with the harder filaments as the standard nozzles will wear out. I suppose it depen...
If all you want to do is print your designs then you can do that from the DXF file that Fusion 360 can produce, in fact Autodesk have their (free) onl...
@john-clarke have you tried this in Fusion 360
@john-minchell Amazon
@jono glad to be of help!
My advice is to just follow the Prusa guide / instructions regarding setting the printer up and you won't go far wrong.
@jono if you look further up this thread you will see my post regarding this but you need the DXF for Laser add in.
@jono thanks Jono
@john-minchell if you currently use dxf files for your machining then yes you could use the ones the add-in produces (it also allows you to set the ke...
I should have pointed out during my webinar that the 'Arrange' option I used to create a dxf file from all of the ribs, is only available on the paid ...
@jeremy-wilkins go for it, it is very satisfying!
@jeremy-wilkins just did the Red Barron - after import it took 4 mins to trace!
@jeremy-wilkins it will take you no more than 5 mins to trace those airfoils, a lot less time than searching for the exact one in a DB. I would sugges...