@martin-o That is a nice build of a neat design.

Stuart I wonder if you are talking about Martin Hepplere's excellent website? JavaProp (mh-aerotools.de) Alternatively, it may have been Thingi...

Stuart I don't know anything about the Atomstack, what I would say though is that it looks like the machine is going slower at the end of the ribs a...

Stuart What type of laser cutter are you using? Barrie

Hello John Yes it is quite OK for non BMFA members to watch the ITAT's and take part if they wish. They just have to register with the link that A...

@john-minchell Hello John, some people give good reviews about an app called CNC Cookbook, as you can imagine it is a kind of machining recipe app. ...

@john-minchell You have to consider the 3D printed part as a casting, meaning that it still needs machining for all parts such as bearings and cylinde...

@leccyflyer Brian, you could use a Bofa type air scrubber, this is the type that would be used in a school or college where they might not be able to ...

@jeremy-wilkins Jeremy In my experience by far the best results with this kind of work are obtained by manual tracing as Ron described above. We w...

@mick-hall Mick, welcome to the forum. Quite a bit going on here. Regards Barrie

@jono Just their standard laser ply but I think there is a stock issue as they have stopped listing some sizes, Balsa Cabin the same. Blame it on the ...

@jono SLEC and Balsa Cabin both have very good materials, 1/8" birch ply is going into short supply and hybrid plies are being substituted. This due t...

@rong A friend of mine is doing some simple projects (not aeromodelling) using Fusion 360 and he was struggling, I went to help, I have never used Fus...

@rong Very well thought out then.