Further to my post above. I’m not sure if the following feature is only available in the purchased copy of Fusion 360, I’ll have to check. To extr...

I like the simple ITATT - In The Air Tonight Trainer. Of course, depending on build quality it could easily turn into MITATT!

My thoughts on the STEM Trainer are: Design - 1400mm ws. Ideally high wing but that doesn’t appeal as much as shoulder or low wing, so a design that...

@pylonuk 😀

@pylonuk got to be Depron!

@jono my gut tells me that I should be able to build it with an auw of circa 1Kg

I’m guessing that a 3542-1000 on 3s turning a 12x6 should be ok.

@jono I’m guessing that using Depron for the build will allow me to fit the battery behind the as drawn firewall. Guess I’ll just have to draw it all ...

@jono I make a ply motor box for mounting leccy motors, it allows for some lateral adjustments and is dead easy to fix to the firewall.

If I was going to build this in balsa (I’m going to try to go it in Depron) I would alter the construction of the wing, do away with the front spars a...

@jono some functions only work on components! My advice would be to use components especially on more complex projects as doing so gives a more ordere...

Once you know how and understand the difference between Bodies and Components it becomes relatively easy and gets over the need to go and get (and lea...

I thought that I'd have a go at reproducing the wing ribs for the Akro using Fusion 360, so sat down a little while ago: Wing ribs created from the ...

I bought mine from Amazon, make sure you get a pair that match the frequency of your laser.

@jono Yes DevWing (more improved version of Profili)looks good it’s just a shame it only runs on Windows unlike WingHelper which is multi platform. Co...